EDM WIRE
Are you looking for wire that can deliver precision cuts and excellent surface finish for your EDM applications? Look no further than our high-quality EDM wire.
We only stock EDM wire made from premium materials and engineered to provide consistent performance and reliable results, even in the most demanding cutting environments. With a range of diameters and spool sizes available, we have the right wire to fit your specific needs.
Contact us with any questions or request a quote.
We Carry All Major Brands
Checkered Flag®
Brass & Zinc
VAN-TG
Deutschcut™
Bedra®
Have questions? Ready to purchase? Our dedicated sales team is standing by. Get in touch with us today!
By phone:
West Coast: 800-336-2946
East Coast / Midwest: 800-511-5532
By email:
Request A Quote Form
Please inquire for spool size and availability
FORMULA G2
Formula G2 wire is a gamma phased wire that contains a high content of zinc that allows for rapid speed while still delivering precision smooth cutting.
Up to 30% higher cutting speed as compared to brass wire.
| Item | Core Material | Tensile Strength | Elongation | Color |
|---|---|---|---|---|
| Hard Brass | Cu63Zn37 | 980 N/mm2 | <0.4% | Gold |
| Half Hard Brass | Cu63Zn37 | 441 N/mm2 | <15% | Gold |
Checkered Flag®
Checkered Flag® brass wire is our signature brand for our high-quality EDM brass wire product line. This wire allows for faster, accurate, and high speed cutting.
With Checkered Flag® brass wire, you can reduce your cutting times and increase your productivity, without sacrificing quality or accuracy. So if you’re looking for the best EDM brass wire on the market, look no further than Checkered Flag®.
| Item | Core Material | Tensile Strength | Elongation | Color | Coating Material |
|---|---|---|---|---|---|
| Checkered Flag® Hard Brass |
CuZn39 | 1070-1100 N/mm2 | 1% | Gold | Paraffin-Free |
| Checkered Flag® Soft Brass |
CuZn39 | 500 N/mm2 | >15% | Gold | Paraffin-Free |
VAN-TG
The CPG products are manufactured to high standards of cleanliness, straightness, consistent diameter, high-tensile strength and a range of diameters and spool sizes. The Van-TG brass wire is specially designed for the specification to best fit the Mitsubishi wire EDM.
Van-TG Premium Brass NP Wire
- Brass wire specially designed for Mitsubishi machines
- Consistent straightness insures threading
- Extremely clean made in Japan wire
- Recommended for cuts up to 10 degrees
Van-TG EP Hard Brass Wire
- Excellent alternative to the premium brass wire
- Paraffin-free brass EDM wire
- Consistent straightness insures threading
| Item | Core Material | Tensile Strength | Elongation | Color | Coating Material |
|---|---|---|---|---|---|
| Van-TG Premium NP | CuZn35 | 900 N/mm2 148,000 PSI |
1% | Gold | Paraffin-Free |
| Van-TG EP | CuZn37 | 900 N/mm2 148,000 PSI |
1% | Gold | Paraffin-Free |
DEUTSCHCUT™ DIFFUSION ANNEALED WIRE
German engineering combines the best of the diffusion annealed EDM wire combining the demands for contour and dimensional precision along with outstanding high surface quality.
DEUTSCHCUT ™ WDX
- Offering high cutting rates as well as precision cuts
- Stratified high performance wire designed for high speed as well as precision cutting
- Developed specially for the X technology on Charmilles machines
- Suited for automatic threading
DEUTSCHCUT ™ WXID
- Designed especially for Charmilles CC Generators
- Similar characteristics to the WSX wire but designed especially for use in Charmilles CC Generators
| Item | Core Material | Tensile Strength | Elongation | Color | Coating Material |
|---|---|---|---|---|---|
| Deutschcut™ WDX | Copper | 520 N/mm2 75,500 PSI |
1% | Brown | CuZn50 |
| Deutschcut™ WXID | Copper | 520 N/mm2 75,500 PSI |
1% | Brown | CuZn50 |